Feedback Tally Firmware Upgrade
Firmware V1 to V2+
Upgrading V2+ devices require both a Tally_Firmware_Vx.x.x.bin and a Filesystem_Vx.x.x.bin to be uploaded separately to receive a full Firmware Update. This is due to a new file management system but will fixed to use only a .zip file to accomplish both in the future.
Current V1 to V2 Upgrade:
The first part is to upgrade the Tally Firmware.
- Unzip the Feedback_Tally_Vx.x.x.zip folder if not already done so.
- Put the Feedback Tally into "Setup Mode" and connect to the Setup Page. (Instructions can be found at https://companionbuddy.io/help/feedbacktally/v1/manual)
- Scroll down to Update Firmware and click the "Choose File" button.
- Find and select the file "Tally_Firmware_Vx.x.x.bin" from this folder. (Not the Filesystem_Vx.x.x.bin)
- Press "Upload Firmware".
The Feedback Tally will reboot as it uploads the Firmware to the device, be patient. The indicator lights will spin blue to show the device has rebooted successfully.
IMPORTANT: THIS IS WHERE V1 AND V2 UPGRADES ARE DIFFERENT!
- Unzip the Feedback_Tally_Vx.x.x.zip folder if not already done so.
- Put the Feedback Tally into "Setup Mode". (Instructions can be found at https://companionbuddy.io/help/feedbacktally/v2/manual)
- ----> Go to "https://setup.companionbuddy.io/legacy" <------ (Use "/legacy" to reach the upgrade screen)
- Under "Filesystem" click the "Chose File" button.
- Find and select the file "Filesystem_Vx.x.x.bin" from this folder.
- Press "Upload Filesystem".
The Feedback Tally will reboot as it uploads the Filesystem to the device, be patient. The indicator lights will spin blue to show the device has rebooted successfully.
The Setup Mode Webpage is now available at "http://setup.companionbuddy.io". Find out more new features in V2+ in the "Feedback Tally User Manual" at "https://companionbuddy.io/help/feedbacktally/v2/manual.
If there are any issues or the device does not boot back up, email support@companionbuddy.io